- 1 Can you repair a SSD drive?
- 2 How do I reset my Crucial SSD?
- 3 Why is my Crucial SSD not showing up?
- 4 Why is my SSD not working?
- 5 How do you tell if your SSD is corrupted?
- 6 How do I clear my boot drive?
- 7 How do I clear the cache on my SSD?
- 8 How do I fix my SSD not detected?
- 9 How do I Unallocate my SSD?
- 10 How do I fix SSD not detected in BIOS?
- 11 How do you fix a corrupted SSD?
Can you repair a SSD drive?
You can repair SSD manually or use EaseUS Partition Master – an SSD repair tool to help you fix corrupted SSD. If all these methods don't work out well, contact your SSD manufacturer and see if they have any better solutions for you.
How do I reset my Crucial SSD?
How to format an SSD
- Click on Start or the Windows button, select Control Panel, then System and Security.
- Select Administrative Tools, then Computer Management and Disk management.
- Choose the disk you'd like to format, right-click and select Format.
Why is my Crucial SSD not showing up?
If the drive does not work in any system or connection, try a power cycle on the drive, and if the drive still does not work, a replacement may be needed. If the drive works in a different system, update to the latest firmware and try in the desktop again. Check to make sure your system has the latest BIOS installed.
Why is my SSD not working?
PC doesn't recognize SSD – This most likely happens due to connectivity issues, such as bad cables of faulty USB ports. New SSD not showing up – This issue is mostly related to the lack of preinstalled drivers, so your PC doesn't recognize the new SSD.
How do you tell if your SSD is corrupted?
- Files can't be read from or written to the drive.
- The computer runs excessively slow.
- The computer won't boot, you get a flashing question mark (on Mac) or “No boot device” error (on Windows).
- Frequent “blue screen of death/black screen of death” errors.
- Apps freeze or crash.
- Your drive becomes read-only.
How do I clear my boot drive?
Open the Settings app, navigate to Update & security > Recovery, click or tap the “Get started” button under Reset this PC, select “Remove everything,” and then select “Remove files and clean the drive”.
How do I clear the cache on my SSD?
Removing the SSD Cache
- Go to Storage & Snapshots > Storage > Cache Acceleration.
- Click Manage and then select Remove. A confirmation message appears.
- Click OK.
How do I fix my SSD not detected?
There are actually a few things you can do to fix the new SSD not showing up on your machine.
- Unplug Other Drives From Your Computer.
- Verify The SSD Shows Up In BIOS.
- Use a Live Linux Distro To See If SSD Shows Up.
- Format Your SSD Drive.
- Update Your Storage Controller Drivers.
- Use Hardware & Devices Troubleshooter.
How do I Unallocate my SSD?
To allocate the unallocated space as a usable hard drive in Windows, follow these steps:
- Open the Disk Management console.
- Right-click the unallocated volume.
- Choose New Simple Volume from the shortcut menu.
- Click the Next button.
- Set the size of the new volume by using the Simple Volume Size in the MB text box.
How do I fix SSD not detected in BIOS?
Solution 2: Configure the SSD settings in BIOS
- Restart your computer, and press the F2 key after the first screen.
- Press the Enter key to enter Config.
- Select Serial ATA and press Enter.
- Then you'll see SATA Controller Mode Option.
- Save your changes and restart your computer to enter BIOS.
How do you fix a corrupted SSD?
How to fix corrupted SSD drive on Windows computer?
- ▌Way 1. Update firmware of not working SSD.
- ▌Way 2. Update drivers to repair SSD.
- ▌Way 3. Run CHKDSK to check and repair SSD bad sectors.
- ▌1. Repair SSD bad sectors.
- ▌2. Reformat the damaged SSD.
- ▌3. Rebuild MBR on SSD drive.
- ▌4. Secure erase SSD.