How do I find my IP for Antminer?

How do I locate my IP address?

Find your IP address in Windows

  1. Select Start > Settings > Network & internet > Wi-Fi and then select the Wi-Fi network you're connected to.
  2. Under Properties, look for your IP address listed next to IPv4 address.

How do I access my Antminer?

Open your browser and enter the IP address of the Antminer device to access the Web interface. After a successful login, you will be sent to the Antminer Dashboard. Change the IP address configuration to static. Enter the desired IP address configuration.

How do I change my Antminer IP address?

This applies to all Antminers….How to set a static IP address

  1. After logging in to your miner's User Interface, click the “Network” tab and choose “Static” from the "Protocol" drop down list.
  2. Then key in your IP address, subnet mask, SWG, DNS.
  3. Click “Save&Apply”, and there you have it!

Jul 11, 2016

How do I reset my Antminer IP address?

Power off the miner, then hold down the IP Reporter and don't release it. At the same time, power on the mine again. Releasing the IP Reporter after 5 seconds, the machine will automatically restore factory settings.

How do I find my IP address for Minecraft?

How to Figure Out What My Server IP Is for Minecraft

  1. Press "Windows-R" to open the Run window.
  2. Type "ipconfig" and press "Enter." The window will display several lines of information.
  3. Look for the line labeled "IPv4 Address." This line displays your computer's IP address.

What is my private IP?

1. Go to Settings > WiFi > tap on your WiFi Network Name. 2. On the next screen, your Private IP Address will be listed next to IP Address Entry under “IPV4 ADDRESS” section.

How do I use IP Reporter Antminer?

Follow these steps:

  1. Extract the file to a convenient location on your computer.
  2. Right‐click IPReporter.exe and run it as Administrator.
  3. Select either of the following options:
  4. Click “Start”.
  5. On the miner control board, press and hold the IP Report button for five seconds, until it beeps.

Sep 16, 2018

What is my router IP?

Find your Router's IP address on Android Go to Settings > WLAN. Click the details icon. Then you could find your Router's IP address show as Gateway.

How do I connect AntMiner l3+?

1:2810:52AntMiner L3+ Setup Guide and Profit Comparison by CryptoCraneYouTube

How do you connect an Antminer to a pool?

Connect to Antpool

  1. Login:
  2. Enter your User ID and password for to log into Antpool or register a new account.
  3. Click the "Bitcoin"at the upper left of the page.
  4. Enter the default IP address of the ANTMINER – Go to the login page, enter the user ID: root, password: root.

What IP do I give my friends for Minecraft?

To connect to you, your friend needs the IP address your router is connected to the internet with. Your ISP (more or less) dynamically assigns this number to you and it's what those "what is my ip" sites show to you. So, to your friend, you're 82.15. X.Y, and that's what he will enter on Minecraft.

How do I make my Minecraft server IP?

Have players joining your server follow the steps below:

  1. In Minecraft, click Multiplayer.
  2. Click Add Server.
  3. Enter a server name.
  4. Enter the server address. This will be your external IP followed by the port number: 25565 This will look like the address in the image on the right.
  5. Click Done.

Feb 3, 2017

What is my IP address for Minecraft?

Type 'ipconfig /all' and hit Enter. Your IP address will be listed under Ethernet if you're using a wired connection and be listed under IPv4 Address. Leave the CMD window open if you want to set up your own Minecraft server otherwise close it.

Related Posts

map Adblock